Home > Products > RF Connector

1.0/2.3

The 1.0/2.3 series is a European design introduced in the 1990s. The compact design of the 1.0/2.3 permits dense connector packing; they are ideally suited to applications where space limitation is a factor.

DIN connectors feature a unique ultra-slim push-pull coupling system which allows quick installation and ensure positive locking and high retention.

Selection Matrix
Gender
Orientation
Cable Group
Panel
Impedance
Interface Mating Dimensions Technical Data

Male Femal
LTRMillimeters / Inches
MinimumMaximum
A Φ2.30 Φ.091 nominal      
B 5.40 .213 5.70 .224
C Φ0.47 Φ.018 Φ0.52 Φ.020
D     1.15 .045
E     5.50 .217
F 4.50 .177    
G Φ1.00 Φ.039 nominal      
LTRMillimeters / Inches
MinimumMaximum
A M5.5×0.5      
B Φ3.00 Φ.118 Φ3.06 Φ.120
C Φ4.03 Φ.159 Φ4.14 Φ.163
D 0.50 .020 0.60 .024
E 1.80 .071 1.90 .075
F 30°± 2°      
G 5.80 .228 5.90 .232
H 6.40 .252 6.50 .256
I 1.15 .045 1.75 .069
J 4.50 .177    
K Φ1.00 Φ.039 nominal      
L R0.75 R .030 R0.85 R .033
M     R0.30 R .011
N Φ3.53 Φ.139 Φ3.60 Φ.142

Electrical:

Nominal impedance50 Ω
Frequency up to6.0 GHz
VSWR1.35 Max.
Working voltage250 Volts rms Max.
Dielectric withstanding voltage1000 Volts rms Min.
Insulation resistance1000 MΩ min.
Contact resistancecenter conductor 4.0 mΩ initial
outer conductor 2.0 mΩ initial

Mechanical&Environmental:

MatingSnap on coupling
Cable retention2.3 Kgf typical
Durability≥ 500 cycles
Engagement force2.75 Kgf Max.
Disengagement force0.4 Kgf Min.
Temperature range-55℃ to +155℃
VibrationPer MIL-STD-202 Method 204 Test Condition D
CorrosionPer MIL-STD-202 Method 101 Test Condition B

Material/Finish:

 MaterialFinish
Connector bodyBrass per(QQ-B-626 or JIS-C3604B)Nickel or Gold plating
Center contact maleBrass per(QQ-B-626 or JIS-C3604B)Gold plating
Center contact femaleBeryllium copper per(QQ-C-530 or
JIS-C1730) 		Gold plating
InsulatorPTFENone

Products